AG真人国际

1、 Equipment name: assembled water tank

2、 Specification and model: hdn-60000-120000l

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

The assembling water tank adopts advanced technology, selects high-quality materials, and sintered enamel at high temperature to form a dense glaze layer on the surface of the water tank, which permeates with the interface ions of the steel plate and forms a diffusion layer with a thickness of about 200-300um, which increases the adhesion strength of the enamel surface.

5、 Water tank cleaning:

◇ Close the inlet valve and open the drain hole plug (or valve) to drain the remaining water in the water tank;

◇ Enter the water tank through ladder;

◇ Use clean mop or cloth to clean the periphery and bottom of water tank. If the scale is serious at the bottom, it can be scrubbed with soft towel and detergent;

◇ Open the water inlet valve and flush the wall and bottom of the barrel with proper amount of clean water, so that the dirt can be discharged from the drain outlet. If necessary, it can be repeated for many times until it is satisfactory;

◇ We should tighten the drain plug, open the water inlet valve, and fill the water tank with water again.

6、 Surface treatment:
First, use angle grinder to clean the scale on the surface of water leakage part, then use electric mill to clean the surface at right angle weld position, carefully clean the surface with sandpaper, and then thoroughly clean the surface with anhydrous ethanol.

◇ Blend material: mix the Fushi blue 1321 material according to the proportion of 3:1 and stir evenly until there is no color difference.

◇ Coating material: brush the adjusted 1321 material to protect the welding seam, and then use 1321 material for large-scale anti-corrosion protection.

◇ Curing time: 24 hours / 24 ℃ (material temperature). When the temperature of the material is increased by 11 ℃, the curing time will be shortened by half, but the rising temperature shall not exceed the bearing temperature of the material.
7、 Features of water tank:

1. With the least material consumption, the best strength can be achieved by the method of material deformation. The square assembled water tank produced by this process has smooth linear shape, strong three-dimensional sense, and can beautify the city appearance.

2. This kind of water tank is designed according to the specification 02s101. It has strong corrosion resistance, good anti-seismic ability, and is easy to transport. It does not need large hoisting equipment. It can be installed on site with different volumes.

3. Compared with the traditional water tank, it is clean and sanitary, with less consumables and stronger structural strength, which can be kept intact for a whole hundred years. Both cold and hot can provide ideal insulation device.

4. Easy installation, arbitrary combination, according to the equipment locations, arbitrary combination into polygon, step, L shape and other forms of water tank.

5. It has excellent material selection, corrosion resistance and crack resistance. 304-2b, 316L stainless steel plate with excellent performance is selected for tensile pressing, which has unique corrosion resistance and crack resistance.

6. It can be widely used in hotels, apartments, high buildings, food, medicine, environmental protection, factories, hotels, chemical industry and other places.

8、 Installation sequence:

1. Equipment foundation inspection → equipment in place → base and frame welding processing → box plate assembly → water tank pipe fittings installation → kerosene penetration test → cleaning → water injection test → user acceptance → delivery.

2. Plate blanking tolerance: ± 2mm

3. Perpendicularity tolerance: H / 1000 ± 1mm

4. Box coordinate tolerance: ± 15mm

5. Elevation tolerance of box body: ± 5mm

6. Position tolerance of water inlet and outlet joint: ± 3mm

1. The system equipment enjoys one-year free warranty, and the warranty date is calculated from the date of product acceptance, and consumable filter materials are not included.
2. In case of equipment quality problems (except caused by misoperation or unforeseen factors) within the warranty period, the supplier shall repair the equipment free of charge and be responsible for replacing the damaged parts.
3. After the expiration of the warranty period, only a certain amount of material fee and appropriate technical service fee will be charged.
4. In case of system failure, which cannot be solved by itself or by telephones, our technical maintenance personnel shall make solutions (including temporary measures) and schedule within 24 hours after receiving the written notice from the demander, and report to the competent leaders of both parties.
5. After the delivery of the equipment, our company will have engineers to pay a return visit to understand the operation of the equipment and provide technical services in a timely manner. We welcome any technical questions and we will reply in time.

(1) the user shall provide the detailed data of raw water test, so that our company can carry out relevant selection and arrangement calculation.
(2) the user shall explain the water quality requirements, use and water yield.
(3) our company has a variety of pressure vessels, membranes, accessories, etc. if the user gives special instructions, we will try our best to meet the requirements.
(4) our company provides installation and debugging for the designed and sold equipment and training for users' operation personnel.
(5) our company implements the principle of one-year warranty and life-long service for users, establishes files and provides tracking service to ensure the quality level.

If the above-mentioned equipment fails to meet your requirements, please contact us. We will formulate detailed engineering scheme according to your actual situation to realize low-cost, high-efficiency and scientific process combination, so as to make water production meet your ideal requirements.