AG真人国际

1、Equipment name: automatic FRP living purified water treatment system

2、Specification model: HDNSCL-2000

3、Equipment brand: Wenzhou Haideneng -WZHDN

Four.Product function Description:

1. Multi-media filter:

It is mainly used to remove impurities such as rust, sediment, algae and suspended solids in the water, reduce the turbidity of the water, make the turbidity of the effluent less than 0.5Ntu, CODMN less than 1.5mg/L, iron content less than 0.05mg/L, SDI≤5.Backwash and forward wash can be carried out at any time through the control valve to flush out the dirt on its surface, prevent its clogging and restore its filtration capacity.

2. Activated carbon filter:

Activated carbon has a very strong adsorption filtration performance, the remaining chlorine in the water, different color, odor, organic matter has a strong adsorption.As the reverse osmosis membrane is very sensitive to residual chlorine and organic matter, it must be configured with activated carbon to adsorb residual chlorine and organic matter, so that the effluent residual chlorine ≤0.1mg/L and SDI≤4, which can first meet the feed water requirements of the reverse osmosis membrane.The second can greatly improve the original taste of the source water.Can be at any time through multiple control valve or steam butterfly valve backwash, to wash off the surface of the colloid and other pollutants, to prevent activated carbon surface is surrounded by impurities do not play adsorption role, and prevent its blocking, restore its treatment capacity.

3. Water softener:

The hardness of water is mainly composed of cations: calcium (Ca), magnesium (Mg) ions.When raw water containing hardness passes through the resin layer of water softerer, calcium and magnesium ions in the water are absorbed by the resin and sodium ions are released at the same time.It from escaping from the exchange of water is to remove the demineralized water hardness ions, when the absorption of calcium and magnesium ions resin after reaching a certain degree, the loss of exchange capacity, water softener, in accordance with the scheduled program at this time, automatically invalidation of the resin regeneration work, with a high concentration of sodium chloride solution through resin, to restore failure of the resin to sodium to resin.

4. Precision security filter:

After pretreatment, a security filter is installed in front of the high-pressure pump to prevent impurity particles larger than 1UM from entering the high-pressure pump and damaging the high-pressure pump and reverse osmosis membrane.Adopt the PP filter element with loose outside and tight inside (with skeleton and good strength), and the water is filtered from outside to inside, which can prolong the blocking time of the filter element.The upper part of the exhaust valve, can prevent the air into the pump and damage the pump, the lower part of the sewage valve, can be removed at any time trapped impurities.

5. Automatic backwash control device:

(1) Flow type product features:

■ Open and close end seal plate without leakage, reliable mechanical performance.

■ With the locking function of the disc.

■LED dynamic color bar display.

■ Long-term power outage tips.

■ Water replenishment in salt tank is controlled by electric ball valve, which can replenish water while running and shorten regeneration cycle.

■ It can be used in the filtration system. The maximum size of the outlet is the same as that of the outlet. It can be used in the filtration system after blocking the salt suction outlet.

■ With signal output port, external booster pump, solenoid valve and other equipment: when the output signal working mode is set to B-01, the valve leaves the operating position of the instant signal open;The signal shuts off at the moment the operating position is reached.When the output signal working mode is set to B-02, when the timing/flow at each position reaches the set value, the signal will be turned on when the motor is about to start and switched to the next position, and the signal will be turned off when it stops at the next position.

Five.Machine features:

◇ Automatic and manual operation/flushing;

◇ Full automatic regeneration of softened water;

◇ High water automatic stop, low water automatic start;

◇ Loss of voltage, undervoltage, overcurrent, short circuit, open circuit, leakage protection;

◇ All stainless steel equipment, automatic operation, no manual integrity.

Milk food, beverage industry ingredients water, rural domestic water, and general industries such as hotels, factories, campus water treatment.

1. The incoming water quality shall be municipal tap water or the same water quality source.

2. Technical indicators of water production:

(1) Water production flow: 2 tons /h (water temperature 25℃) domestic soft water purification requirements

(2) It conforms to the National Water Quality Standard for Domestic use CJ94-2005

(3) Total hardness less than 0.03mmol/cm)

1. The system equipment is guaranteed free of charge for one year, starting from the date of product acceptance, except for consumable filter material.

2. In case of equipment quality problems (except misoperation or unforeseeable factors) occurring during the warranty period, the supplier shall carry out maintenance for free and be responsible for replacing the damaged parts.

3. After the expiration of the warranty period, only certain material fee and appropriate technical service fee will be charged.

4. In case of failure in system operation that cannot be solved by ourselves or by telephones, the technical maintenance personnel of our company shall make solutions (including temporary measures) and schedule within 24 hours upon receipt of written notice of failure from the demander and shall report to the competent leaders of both parties.

5. After the equipment is delivered, our engineers will pay a return visit to understand the operation of the equipment and provide technical services in a timely manner.We welcome any technical queries from users and will respond promptly.

(1) The user should provide the detailed information of raw water test, so that our company can carry out relevant type selection and arrangement calculation.

(2) The user should explain the water quality requirements, uses and production capacity.

(2) Our company has a variety of pressure vessels, membrane, accessories, etc., if the user specified, we will try our best to meet the requirements.

(2) Our company provides the installation and debugging of the equipment designed and sold and the training of the operation personnel for the users.

(2) Our company carries out the principle of one-year warranty and lifetime service for users, and sets up files for tracking service to ensure the quality level.

If the above equipment fails to meet your requirements, please contact us, we will be based on your actual situation to develop a detailed project plan, to achieve low cost, high efficiency, scientific process combination, so that the water production to meet your ideal requirements.